










Marble pendant light
Selinunte Slim Marble Tube Pendant Light
Or 4x $44.75 with PayPal and Klarna
Diameter: 2" (4 cm) · Height: 11" (28 cm)
- Real marble, never an imitation
- Wired for US homes, 110-120 V
- Free shipping, tracked to your door
- 14 days to change your mind
- Help choosing a size: contact@ambravera.com

Privilege Week
25% to 60% off sitewide
Until Sunday, November 8 at midnight ET
Dimensions & specs
Material: Marble, metal
Diameter: 2" (4 cm)
Height: 11" (28 cm)
Color: Light veined marble
Socket: Medium base (E26/E27), bulb not included
Voltage: 110-120 V (US standard)
Description
A slim tube of marble, 2" across and 11" tall, cut thin enough for light to pass along its whole length. The stone is pale and veined, held by a small canopy and a fine cord. It reads as a single vertical line, almost a pencil stroke against the wall or in the corner of your room.
The Selinunte marble pendant light is named after Selinunte, an ancient Greek city on the southwest coast of Sicily, where columns of pale stone still stand facing the sea.
Switch it on and the stone lights up from the inside. The veining shows through in reverse, darker lines drawn across a warm glow from top to bottom. The light stays soft and close to the tube, with no glare. Think of it as mood lighting: a quiet accent, not the main light in the room.
A slim marble tube pendant for nightstands, hallways and kitchen islands
It comes in one size, 2" wide and 11" tall (4 x 28 cm). The narrow profile slips above a nightstand, along an entryway or on either side of a headboard without taking up visual space. Hung low over a kitchen island in a row of 2 or 3, it draws clean vertical lines and keeps the view across the room open.
Want to compare it with other shapes and materials? Browse all our pendant lights and find the one that fits your room.
A natural stone pendant light for calm, contemporary interiors
Marble is a natural stone, and its veins catch the light the way grain does in wood. Cut this thin, it glows instead of hiding the bulb. The fixture stays minimal: a canopy, a cord and the stone. This marble pendant light pairs with travertine, light oak, plaster walls and pared-back rooms, from the kitchen to a powder room or a quiet entryway.
The stone is natural, so each tube carries its own veining and no two look exactly alike.
Free delivery in 4 to 8 business days
Every order ships free and arrives in 4 to 8 business days. You receive a tracking link by email as soon as it leaves.
Arrived damaged? Send us a photo at contact@ambravera.com: we replace or refund it, return shipping on us. Details in our shipping policy.
Returns within 14 days
You have 14 days from delivery to change your mind, no reason needed. Send the light back complete, in its original packaging, and we refund you.
Full details in our refund policy.
Hanging height & installation
Over a dining table, leave 30 to 34 inches between the tabletop and the bottom of the shade. Over a kitchen island, 30 to 36 inches. With nothing below, keep at least 7 feet of clearance.
The light connects to a standard ceiling junction box like any fixture. If you are not comfortable with wiring, a licensed electrician will install it quickly.
Choose options











The material
Marble, veined by nature
The veins run differently through every piece, so the pattern on your light is yours alone. Lit from inside, the thinner stone glows warm.
- Origin
- Natural stone, cut and polished
- Light
- Warm glow through the stone, focused below
- Care
- Wipe with a soft, dry cloth. Avoid acidic products.
Height guide
Hang it right and the room changes
30-34"
30-36"
7 ft+
7 ft+
20-24"
60-66"
The height decides everything. Hang a pendant too high and it behaves like a ceiling light. Bring it down to the right height and it gathers people around the table, frames the bed and gives a kitchen its rhythm. Pick where yours will hang.
30 to 34"
Between the tabletop and the bottom of the shade. Low enough to feel intimate, high enough to see across the table.
30 to 36"
Above the countertop. In a row of two or three, leave 24 to 30 inches between shades.
7 ft +
From the floor to the bottom of the shade when nothing sits below. Over a coffee table, you can come lower.
7 ft +
From the floor, for a central light. A wide, soft shade keeps the light gentle at night.
20 to 24"
Above the nightstand. It replaces a table lamp and frees up the surface.
60 to 66"
From the floor, one on each side of the mirror, around eye level.
Questions
Before you order
Anything else about this light, write to us. We reply within one business day.
How do I choose the right size?
Over a dining table, pick a shade about half to two thirds the width of the table. Over an island, two or three smaller shades usually look better than one large one. Send us your measurements and we will tell you which size fits.
Is the bulb included?
No, so you can choose your own warmth. Most designs take a standard medium base E26 bulb; the socket is listed under Materials & dimensions. A warm white LED around 2700 K brings out the weave and the stone.
Will it work with US wiring?
Yes. It is wired for 110-120 V, the US standard, and connects to a regular ceiling junction box.
Can I mix designs in a pair or a trio?
Yes. Choose Pair or Trio, then add any designs and sizes you like: the discount counts every light in your cart.
Will mine look exactly like the photos?
Very close, not identical. Rattan, rope and stone are natural materials, so the weave, the veins and the tone vary slightly from one piece to the next.
What if it arrives damaged?
Send us a photo at contact@ambravera.com. We replace or refund it, and any return shipping is on us.
After you order
We stay close after the sale
-
1
Arrived damaged? Send us a photo
We replace or refund the light, and any return shipping is on us.
-
2
A reply within one business day
By email, from someone who knows every design in the collection.
-
3
Help choosing the size
Send us your ceiling height and the length of your table or island. We tell you which diameter, and how many.
Write to us: contact@ambravera.com